Low Lift H50 on
25QD/Stryker Cat
VII (2.52"Dia
x 6" Max Pitch)
__________Deep Strut
Setting__________
This Prop has ran 70 > 74mph on
the above setup. Notice the Spooned shape blades, with both the Trailing
& Leading edges Cupped. This H50
has been modified to remove "Lift" and condense
the thrust cone further back, for more forward push! The blades have been
cupped and "Spoon" shaped to allow the deep strut setting
of 1/2" below the sponsons. The mod. H50 specs. are (2.52"
Dia x 6" max pitch). The blade hasn't been
cut down, the tips have
been Rolled & Spooned, to reduce the Dia from 2.56" to
2.52". The low
strut setting reduces
"Slip" without loading the engine, and enables
faster
top speed with
improved handling. A
modified H50 or similar prop, is required to
enable the deep strut. This
is one of my best tricks!!.
Paul Govostes June
2000
|
