Maus Hydro / 25.6J&G closeup   
This is the 25.6cc J&G Billet Engine, with double cut QD pipe; in a 43 inch Maus (Gas Scorpion) Epoxy Hydro. This boat is rigged with Don Gardner XL running hardware, Aeromarine Collet Drive, and precise bell-crank throttle linkage. The engine is a very tight fit with J&G's Motor Mounts. All Futaba radio gear and servos, including the 3PJ (PCM) Radio. RTR dry weight only 12lbs. With a Mod H50 prop, this hydro ran 66mph, however at speeds over 65, it's very difficult to keep from blowing-off. NOTE: This is the previous version 25.6cc J&G Engine.

P Govostes  02/02

____Very Snug Fit In Engine Compartment____

Back

RC Props.Com 

 All Rights Reserved 2002