____Lt.Wt.Octura Alium Strut "Cut-
Skeg"____
Collet Drive Octura light weight alium. strut with
Cut Down Skeg, sharpened on Right Side for torque correction. This
helps track the boat straight with zero rudder correction. Strut set at
slight negative angle, to keep the bow down at high speeds! Also the
Rudder is slightly kicked-in towards the transom. This helps "Lift" the
bow going threw turns. Note: the Aeromarine stuffing tube has a
smaller dia. end piece
that fits into the nose cone. The strut angle is adjusted by sliding the
nose piece in or out, along the stuffing tube end piece. This is a well
proven hardware setup, that I've used for years.
|
