25QD Stryker Transom/ Modified H50 prop  

Notice: the very gradual bend in the Stuffing Tube, this reduces Cable friction and lessons drag, for increased rpm and speed. It also really helps to prevent Shaft Braking! The tube is straight where it exits the hull bottom. It starts a gradual bend 4 > 6" after it exits the hull bottom. (Deep Prop) The bottom of the stuffing tube is set deep, 1/4 > 1/2" below the bottom of the sponsons. This greatly reduces "Slippage" and increases forward thrust with more bite at the prop. Also helps to keep the nose down @ high speeds.

Back

       RC Props.Com 

     All Rights Reserved 2002