Muck hulls are hard to come by, this one runs 66+ on radar down the straight and 60mph thru the turns, using a custom 7020/3 back-cut & pitch-up. I use the EX-Large Octura SS Strut with sharpened Skeg. And a cut-down Speedmaster dual pickup rudder, with my QD Setups. The Skeg is a must, to help off-set chine-walk caused by the high torque Q-Draws, and spin-out in the turns. This setup has the non-ported  35QD A4, with 27.5 degree ignition timing and 168 Exhaust timing. The standard (sm) QD Pipe with 1/2"cut from header, is the trick pipe for this motor/ = 300 > 500 additional rpm without lousing bottom end torque. This fast mono actually runs best in ruff water with a modified PropShop 7020/3. Full power turns at 60mph while flying around the oval. It's a gas racers dream setup, because of it's fast speed, stability, and handling.

                               Paul Govostes 10/2000                     Back

RC Props.Com 

Copyright © 2002