_____Modified ABC H50____

 Shows recent mild modified H50 with No Lift removed, for Hydros and 

   Riggers that need a certain amount of Lift. Larger (2.57 Dia. x 5.8" Max Pitch),

      less Spooning of the blades and tips, for added lift. A slight Barr-Cut between

the leading edge and the hub. Normally Barr-Cuts are at the trailing edge, near the 

hub. This design creates both a lifting and pushing prop, that works well with high rpm

 surface drive hydros an out-riggers. All surfaces are smooth and polished, with razor sharp

             leading edges. This allows the prop to enter, exit, and rotate threw the the water; with minimal resistance.    Back

RC Props.Com Copyright © 2003