25QuickDraw Stryker Cat

Shows Transom at 45degree angle with full cowl. Note: the low strut setting, the bottom of

  the stuffing tube is 1/2" below the sponsons. This reduces "Slip" without loading the engine,  

and enables much faster top speed with improved handling. A modified H50 or similar prop,

 is required to enable the deep strut. The above H50 has been modified to remove "Lift" and   

condense the cone further back, for more forward push! The blades have been cupped and

"Spoon" shaped to allow the deep setting. The mod. H50 specs. are (2.52" Dia x 6") max pitch.

  The blade hasn't been cut down, the tips have been Rolled & Spooned, to reduce the Dia

 from 2.56" to 2.52". This is one of my best tricks!!

                                          Paul Govostes 10/23/02                                  Back

Props.Com 

All Rights Reserved 2002

Best viewed @ 1280x1024 dpi